Q-Logic iSR6142 Bedienungsanleitung PDF herunterladen (Seite 61)

4 – Command Reference

Command Syntax

SN0054659-00 A 4-41

Set iSNS

Configures iSNS parameters for an iSCSI port.

Authority Admin session

Syntax set isns [port_num]

Keywords [port_num]

Specifies the number of the iSCSI port to be configured for iSNS.

Examples Set iSNS command example:

QRouter (admin) #> set isns 1

A list of attributes with formatting and current values will follow.

Enter a new value or simply press the ENTER key to accept the current

value. If you wish to terminate this process before reaching the end

of the list press 'q' or 'Q' and the ENTER key to do so.

Configuring iSNS iSCSI Port: 1

--------------------------------

iSNS (0=Enable, 1=Disable) [Disabled ] 0

iSNS Address (IPv4 or IPv6) [0.0.0.0 ]

fe80::21b:21ff:fe06:d517

TCP Port No. [3205 ]

All attribute values for Port 1 that have been changed will now be

saved.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 153 154

Keine Kommentare

Q-Logic iSR6142 Bedienungsanleitung Seite 61