Q-Logic 42051 Bedienungsanleitung Seite 145

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 196
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 144
B – Command Line Interface
Set Setup Command
59021-06 A B-47
D
The following is an example of the Set Setup System command:
SANbox2 (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Eth0NetworkDiscovery (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) [Static ]
Eth0NetworkAddress (dot-notated IP Address) [10.0.0.1 ]
Eth0NetworkMask (dot-notated IP Address) [255.255.255.0]
Eth0GatewayAddress (dot-notated IP Address) [10.0.0.254 ]
FCNetworkDiscovery (1=Static, 3=Dhcp) [Static ]
FCNetworkAddress (dot-notated IP Address) [0.0.0.0 ]
FCNetworkMask (dot-notated IP Address) [255.0.0.0 ]
FCGatewayAddress (dot-notated IP Address) [10.0.0.254 ]
AdminTimeout (dec value 0-1440 minutes, 0=never) [30 ]
TempMonitoringWarning (dec value 0-100 degrees Celsius) [65 ]
TempMonitoringFailure (dec value 0-100 degrees Celsius) [70 ]
TempFailurePortShutdown (True / False) [False ]
SecurityEnabled (True / False) [False ]
LocalLogEnabled (True / False) [True ]
RemoteLogEnabled (True / False) [False ]
RemoteLogHostAddress (dot-notated IP Address) [10.0.0.254 ]
Seitenansicht 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 195 196

Kommentare zu diesen Handbüchern

Keine Kommentare